2008 Polaris Ranger RZR Service Manual, Page 186Get this manual
CLUTCHING Clutch Assembly
NOTE: It is important that the same number and thickness of washers are reinstalled beneath the spider during assemblyThe Teflon bushings are self-lubricating4Torque spider to specification using the holding fixture and spider toolTorque with smooth motion to avoid damage to the stationary sheave
Spider Torque: 200 ftlbs(271 Nm)
CAUTION
Do not apply oil or grease to the bushingsReassemble the drive clutch in the following sequenceBe sure the "X", or the marks that were made earlier are aligned during each phase of assembly
CAUTION
Be sure the spider spacer washers are fully seated in the recessed area in the spiderAny misalignment will alter clutch balanceInverting the clutch while initially tightening the spider will help position the washers5Install limiter nut on top of spider using the Clutch Spider Nut Socket (PN 2870338)Torque to specification