2008 Polaris Ranger RZR Service Manual, Page 166Get this manual
BODYSTEERINGSUSPENSION 11Remove the (2) fasteners (E) attaching the lower A-arm to the frame and remove the lower A-arm from the vehicle (see previous illustration)12Examine A-arm and bearing carrier bushings and pivot tubes (see "Exploded View")Replace if wornDiscard hardware13If not replacing the A-arm, thoroughly clean the a-arm and pivot tubes14Insert new A-arm bushings and pivot tubes into the new A-armPivot Tube Upper A-arm
Exploded View
37 ftlbs(50 Nm)
Bushings
Installation
1234567Install lower A-arm assembly onto vehicle frameTorque new fasteners to 37 ftlbs(50 Nm)Attach lower A-arm to bearing carrierfastener to 37 ftlbs(50 Nm)Torque new
37 ftlbs(50 Nm)