2008 Polaris Ranger RZR Service Manual, Page 165Get this manual
BODYSTEERINGSUSPENSION REAR A-ARMS
Removal
The following procedure details upper and lower A-arm removal and replacement on one side of the vehicleRepeat the following steps to remove the A-arm(s) from the opposite sideNOTE: Use the exploded view in this section as reference during the procedure (see page 5.22)12Elevate and safely support the rear of the vehicle off the groundRemove the wheel nuts, and rear wheel67
WARNING
The locking agent on the existing bolts was destroyed during removalDO NOT reuse old hardwareSerious injury or death could result if fasteners come loose during operationIf not replacing the A-arm, thoroughly clean the a-arm and pivot tubesInsert new A-arm bushings and pivot tubes into new A-arm