2008 Polaris Ranger RZR Service Manual, Page 156Get this manual
BODYSTEERINGSUSPENSION Hood and Front Body Work
Hood Removal 1To remove the hood, lift up on the rear portion of the hood to disengage the pins from the grommets4Remove the (8) push rivets that attach the dash assembly to the rocker panels on each side
Lift Up HERE
Remove the (2) Torx screws and (2) push rivets that retain the front and rear portions of the dash assembly and remove the dash assembly from the vehiclePush Rivets
Tilt the hood back to disengage the front tabs and remove the hood from the vehicle
Front BodyDash Removal 123Remove the hood as previously describedRemove the front bumper (see "BODY COMPONENT REMOVALFront Bumper")Remove the front portion of the cab frame assembly to allow dash removalRefer to "CAB FRAMEAssemblyRemoval" for assembly torque specificationsFront Fender Flair Removal 12If dash is installed, remove the (2) push rivets that attach the lower portion of the fender flair to the rocker panelsRemove the (6) push rivets and remove fender flairs from the dash assemblyRemove Torx Screws