2008 Polaris Ranger RZR Service Manual, Page 82Get this manual
ENGINE 2Remove the nylok nut (C), washer (D), and water pump impeller (E)Remove part of the water pump seal behind the impeller5Remove the starter bendix (G), wire holddown plate (H), and the woodruff key (I) from the crankshaftThe stator does not have to be removed at this point
34Remove flywheel nut and washerInstall Flywheel Puller (PN 2871043) and remove flywheel (F)6Remove the gearstator housing bolts and remove the gear stator housing cover (J) and gasket from the crankcaseBe sure to catch the excess oil from the crankcase