2008 Polaris ATV Predator 50, Sportsman Outlaw 90 Service Manual, Page 145Get this manual
CVT SYSTEM DRIVEN CLUTCH SERVICE
Driven Clutch Disassembly and Inspection
1Remove driven clutch assembly by removing O-ring and nut5Remove the outer roller pin cover by turning and pulling up on the coverReplace the two sealing O-rings2
Remove outer drive hub (transmission shaft hub)
Remove rollers and pins using needle-nose pliers and inspect all componentsReplace if any damage or excess wear is foundReplace the o-rings and seals anytime the driven is apart