2008 Polaris ATV Predator 50, Sportsman Outlaw 90 Service Manual, Page 31Get this manual
MAINTENANCE 2Use non-synthetic brush to clean the arrestor screenA synthetic brush may melt if components are warmIf necessary, blow debris from the screen with compressed airInspect the screen for wear and damageReplace if necessaryReinstall the arrestorTorque the screws to ftlbs(9.5 Nm)2Remove the fill plug
Transmission Lubricant Level
The gear case fill plug is located on the side of the gear case on the right side of the ATVMaintain the lubricant level at the bottom of the fill plug hole threads.uld be checked monthly and changed annually1Position the vehicle on level surface
TRANSMISSION AND FINAL DRIVE
Transmission Lubrication
The transmission lubricant level should be checked and changed in accordance with the maintenance scheduleRemember to: Verify the vehicle is level before proceeding Verify the vent hose is routed properly and is not obstructed Follow instructions to checkchange transmission fluidDrain Plug Fill Plug