2008 Polaris ATV Outlaw 450/525 Service Manual, Page 161Get this manual
ELECTRICAL Brake Light Switch Tests
Foot Brake Switch 1Disconnect wire harness from switch
Clutch Switch Test
1Disconnect wire harness from switch
223Connect an ohmmeter across switch contactsThe circuit should have an open line or infinity readingApply foot brake and check for continuity between switch contactsReplace switch if there is no continuity or if continuity is greater than .5 ohms when the brake is applied with slight pressure3
Connect an ohmmeter across switch contactsThe circuit should have an open line or infinity readingApply the clutch lever and check for continuity between switch contactsReplace switch if there is no continuity or if continuity is greater than .5 ohms when the clutch lever is applied