2008 Polaris ATV Outlaw 450/525 Service Manual, Page 126Get this manual
BODYSTEERINGSUSPENSION 3Thread the positioning head onto the IFP locator tool and adjust the top of the value indicator to the appropriate measurement7Screw the pressure valve assembly into the valve port by hand with slotted head screwdriverTighten to 100-110 inlbs(11-12 Nm) of torque
NOTE: Depending on which shock absorber is being worked on, adjust the piston location tool to the specified depth indicated in the shock specification chart4Apply thin film of oil onto the floating wear band and Oring and install the floating piston into the top of the shock body, positioning it below the counterboreFill the shock body with shock oil to the bottom of the threads within the cylinder
NOTE: After filling the shock body with oil, allow couple of minutes for all air bubbles to rise to the top