2008 Polaris ATV Outlaw 450/525 Service Manual, Page 123Get this manual
BODYSTEERINGSUSPENSION RydeFXTM Shock Rebuild Procedure
Required Tools NOTE: Before unscrewing pre-load springs, measure the compressed length of the installed spring and mark position for reinstallation
RydeFXTMGas Charge Tool (Inflation Needle) RydeFXTM IFP ExtractionLocator Tool Adjustable Wrench 564" Hex Key Slotted Head Screwdriver Torque Wrench Vernier Caliper or Micrometer Rod Thimble Rod Blocks Pic Tool Shock Spring Compressor Nitrogen Regulator 43
CAUTION
When removing the spring from shock that utilizes fixed lower retainer; the use of proper spring compressor should be used to avoid risk of bodily injuryWash the shock body in parts cleaner; then dry with compressed air to remove sand and dirt
WARNING