2008 Polaris ATV Outlaw 450/525 Service Manual, Page 42Get this manual
MAINTENANCE 2Torque the front two bolts to 11 ftlbs(15 Nm), then torque the rear two boltsA gap of up to 18" will remain at the rear bolts
Toe Alignment Inspection
One of two methods can be used to measure toe alignmentThe string method and the chalk methodIf adjustment is required, refer to "Toe Adjustment" for procedureMETHOD 1: USING STRAIGHTEDGE OR STRING
Steering InspectionTie Rod Ends and Hubs
To check for play in the tie rod end, grasp the steering tie rod, pull in all directions feeling for movement Repeat inspection for inner tie rod end on steering post
WARNING