2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 359Get this manual

2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 359

ELECTRICAL 3Remove the front bracket assembly and the rear bracket assemblyRemove the shims from the armature shaft and inspect the O-rings located on the armature housing2Measure resistance between insulated brush and starter housingReading should be infinite(OL)Inspect insulation on brush wires for damage and repair or replace as necessary

NOTE: The shims reassembly

replaced

Back to 2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual