2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 225Get this manual

2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 225

FINAL DRIVE ReassemblyInspection
1Replace all O-rings, seals, and worn components5Install the LH output hub (A) into the gearcase housingThe output hub should spin freely
Press the pinion shaft seal into the pinion cover, until the seal is flush with the sealing surfaceInspect bearings on output and pinion shaftsTo replace, press new bearing on to shaftInstall the RH output hub (B) into the output coverThe output hub should spin freely

Back to 2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual