2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 189Get this manual
CLUTCH SYSTEM NOTE: Bushings are installed at the factory using Loctite( 609In order to remove bushings it will be necessary to apply heat evenly to the area around each bushingClean all residual Loctite( from bushing bore prior to installing new bushingDrive Clutch Bushing Installation 1Place main adapter (Item 8) on pullerPuller Tool (A,B) Side "A" toward sheave Nut (C)
CAUTION
Clutch components will be hot! In order to avoid serious burns, wear insulated gloves during the removal processDrive Clutch Bushing Removal 12345Remove clutch as outlined previously in this chapterInstall handle end of Piston Pin Puller (PN 2870386) securely into bench vise and lightly grease puller threadsRemove nut from puller rod and set asideInstall puller adapter (Item 10 from kit PN 2871226)Install main adapter (Item D) onto pullerPuller Tool (A,B) Side "A" toward sheave Nut (C) Main Adapter (8)
Bushing