2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 112Get this manual
ENGINE 8Install breather reed (G) into rocker cover (H)Lightly apply black RTV sealant to the outer edges of the breather reedThe reed has tab and will assemble one-way onlyTorque the breather bolts to specification11Install thermostat (J), new O-ring, and thermostat housingTorque to specification
Breather Bolt Toque: 20 inlbs(2.5 0.55 Nm) NOTE: When applying RTV, do not get any RTV inside the reed assemblyPlace new seal (I) into the bottom of the coverBe sure the seal is seated into the cover properlyIMPORTANT: Before assembly, clean the bolts and bolt holes with Primer (PN 2870585) to remove any debrisThis will ensure proper sealing when installing bolts20in.lbs(2.5.55 Nm) 9