2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 106Get this manual
ENGINE 28Install new crankshaft seal (P) into the gearstator housing cover (O)Use the Universal Driver Handle (PU-45543) and the Main Seal Installer (PA-45483) to seat the crankshaft seal into place30Carefully install the tapered end of the Crankshaft Seal Protection Tool (PA-45658) through the paper side of the crankshaft seal(Back to Front) Leave the seal protector installed in the crankshaft sealCheck the crankshaft seal lips to verify they have not been rolled or damaged
PU-45543
PA-45483
NOTE: Install the crankshaft seal (P) with the seal lip facing out (towards the crankcase)
31Before installing the gearstator housing cover, install the Water Pump Seal Saver (PA-45401) onto the water pump shaft