2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 105Get this manual

2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 105

ENGINE NOTE: Cam Spanner Wrench (PU-45498) is only needed to rotate the camshaft when the entire valve train is assembledBefore installing the gearstator housing, replace the seals in the

Timing Marks

PU-45498

Counterbalance Gear and Camshaft Gear Bolt Torque: 22ftlbs(30Nm) coverInstall new water pump seal (N) into the gearstator housing (O)Use the Water Pump Mechanical Seal Installer (PA-44995) to properly install the seal to the correct depth in the coverDue to seal design and construction, seals MUST be

Back to 2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual