2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 78Get this manual
ENGINE Rocker Arms
1Mark or tag rocker arms in order of disassembly to keep them in order for reassembly5If the push rod (A) is visibly bent, it should be replaced
Cylinder Head Removal
2Inspect the wear pad at the valve end of the rocker arm for indications of scuffing or abnormal wearIf the pad is grooved, replace the rocker armNOTE: Do not attempt to true this surface by grinding3Check the rocker arm pad and fulcrum seat for excessive wear, cracks, nicks or burrs12Loosen the six cylinder head bolts evenly 18 turn each in criss-cross pattern until looseRemove bolts (A) and tap cylinder head (B) lightly with soft face hammer until looseCAUTION: Tap only in reinforced areas or on thick parts of cylinder head casting to avoid damaging the head or cylinderRemove cylinder head (B) and head gasket (C) from the cylinder (D)Push Rods