2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 73Get this manual
ENGINE 14Refer to PVT System Chapter to remove outer clutch cover, drive belt, drive clutch, driven clutch, and inner cover (F)19Remove all engine mount nuts andor engine mount platesRemove the frame brace (G) from the front left side of the frame
15When removing starter cables, note and mark ground cable and positive (+) cable mounting angle and locationsRemove cables16Remove transmission linkage rod from gear selector and secure out of the way17Disconnect coolant temperature sensor wire located on the cylinder18Remove engine to chassis ground cable