2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 49Get this manual
MAINTENANCE ATV Controls
Check controls for proper operation, positioning and adjustmentBrake control and switch must be positioned to allow brake lever to travel throughout entire range without contacting switch body3Elevate the side of the vehicle by placing suitable stand under the footrest frame4Remove the wheel nuts and remove the wheel
Wheel Installation
1With the transmission in park and the parking brake locked, place the wheel in the correct position on the wheel hubBe sure the valve stem is toward the outside and rotation arrows on the tire point toward forward rotationAttach the wheel nuts and finger tighten themLower the vehicle to the groundSecurely tighten the wheel nuts to the proper torque listed in the table
Wheel Inspection