2007 Polaris Sportsman 700/800/800 X2 EFI Service Manual, Page 45Get this manual
MAINTENANCE Wheel Alignment
Place machine on smooth level surfaceSet handlebars in straight ahead position and secure handlebars in this position3Place chalk mark on the center line of the front tires approximately 10, (25.4 cm) from the floor or as close to the hubaxle center line as possibleNOTE: It is important that the height of both marks be equally positioned in order to get an accurate measurement45Measure the distance between the marks and record the measurementCall this measurement "A"Rotate the tires 180' by moving vehicle forward or backwardPosition chalk marks facing rearward, even with the hubaxle centerlineAgain measure the distance between the marks and recordCall this measurement "B"Subtract measurement "B" from measurement "A"The difference between measurements "A" and "B" is the vehicle toe alignmentThe recommended vehicle toe tolerance is 18, to 14, (.3 to .6 cm) toe outThis means the measurement at the front of the tire (A) is 18, to 14, (.3 to .6 cm) wider than the measurement at the rear (B)12