2005 Polaris Sportsman 700/800 EFI Service Manual, Page 296Get this manual
ELECTRICAL 6Place armature in growlerTurn growler on and position hacksaw blade or feeler gauge lengthwise 18 (.3 cm) above armature coil laminatesRotate armature 360 If hacksaw blade is drawn to armature on any pole, the armature is shorted and must be replacedCAUTION: Use care when handling starter housingDo not drop or strike the housing as magnet damage is possibleIf magnets are damaged, starter must be replaced
Roller Bearing Seal
STARTER REASSEMBLYINSTALLATION
1Install brush plate to field magnet housing aligning index tab