2005 Polaris Sportsman 700/800 EFI Service Manual, Page 289Get this manual
ELECTRICAL
Check for continuity between the switch contacts Place meter leads between two contacts with switch in ON positionProbe the worklight plug wires at back of vehicle, there should be at least 12V at the plugCheck for 12 volt power at the blue wire
2To remove the brake light electrical connector (B), press in on the tab on the connector to unlock the connector and pull the connector from the bulb assembly
Worklight Plug Wires
A 3To remove either of the bulbs, turn the holder assembly counterclockwise to remove and pull outTurn the holder assembly clockwise to installRefer to the parts manual for the correct bulb part number