2005 Polaris Sportsman 700/800 EFI Service Manual, Page 197Get this manual
FINAL DRIVE Gearcase Coil Resistance NOTE: To test the gearcase coils resistance, use the coil harnessThe gearcase coils should measure between 22.8 ohms and 25.2 ohms3Remove output shaft assemblyB
8Inspect roll cage (B) sliding surfaceThis surface must be clean and free of nicks, burrs or scratchesRemove and inspect the HspringsB NOTE: Be careful not to misplace the thrust bearing located between the two output shafts4Clean all parts and inspect spacers for wearInspect ring gear for chipped, broken, or missing teeth5Remove the roll cage assembly, rollers, and HspringsHspring 9Use flat head screwdriver to remove the retaining clip from the output coverC