2005 Polaris Sportsman 700/800 EFI Service Manual, Page 169Get this manual
CLUTCH Moveable Sheave Bushing Inspection
2Inspect the Teflont coating on the moveable sheave bushingbutton is positioned toward the solid roller pinIt is recommended to switch all buttons to the rubber version during service (if needed)
Moveable Sheave Bushing Inspection: Replace the cover bushing if more brass than Teflont is visible on the bushingRefer to bushing replacement in this chapter
ONE-WAY CLUTCH INSPECTION (DRIVE CLUTCH)
1Rotate one-way clutch clockwise (as viewed from the cover plate side)The clutch should rotate on the shaft with only slight amount of dragVerify there is no binding or rough spotsWhen rotated counterclockwise, the clutch should lock to the shaft without slippingIf problems are noted in either direction, continue with disassembly