2005 Polaris Sportsman 700/800 EFI Service Manual, Page 132Get this manual
FUEL SYSTEMFUEL INJECTION G With engine off, back out air flow screw until it no longer is in contact with throttle plate camThe throttle plate should seal off throttle bore completely
Establishing correct flow: Now that the zero offset voltage has been set, you can now set the throttle body to the correct air flow valueG With voltmeter still attached to tool PN PU47082, turn the air flow adjustment screw until the voltmeter reads .710 .01 voltsThe throttle body is now adjusted to the correct flow value Figure 3
Back air flow screw out until no contact is made
Turn air flow screw in
Figure Open and close throttle plate couple of times to ensure full throttle closingDo not snap closed, as this could cause unnecessary throttle plate to throttle body interference andor damageSet up the TPS voltage check tool PN PU47082 according to the instructionsVerify that the volt battery has minimum of voltsFigure 2Should read .528v