2005 Polaris Sportsman 700/800 EFI Service Manual, Page 105Get this manual
Line Up Marks
NOTE: Before assembly, clean the bolts and bolt holes with Primer (PN 2870585) to remove any debrisThis will ensure proper sealing when installing bolts and new Loctitet20Install oil pump housing bolts (H)The new bolts contain patch lock, so Loctitet is not needed on the new boltsTorque bolts to 84 in.lbs(9.50 0.90 Nm) and follow the torque sequence on Pg3.3NOTE: Occasionally spin the oil pump when installing bolts to check for binding of the rotors
18Apply moly lube, lubriplate, or oil to the rotors on the oil pump shaftNOTE: The application of oil or lubriplate aids in priming the oil pump during initial engine start upLubricate Rotors