2005 Polaris Sportsman 700/800 EFI Service Manual, Page 49Get this manual
MAINTENANCE
Inspect all wheels for runout or damageCheck wheel nuts and ensure they are tightDo not over tighten the wheel nuts
4Remove the wheel nuts and remove the wheel
WHEEL INSTALLATION
1With the transmission in gear and the parking brake locked, place the wheel in the correct position on the wheel hubBe sure the valve stem is toward the outside and rotation arrows on the tire point toward forward rotation2Attach the wheel nuts and finger tighten them3Lower the vehicle to the ground4Securely tighten the wheel nuts to the proper torque listed in the tableCAUTION: Improperly installed wheels could affect vehicle handling and tire wearOn vehicles with tapered rear wheel nuts, make sure tapered end of nut goes into taper on wheelTorque to proper specificationSteel Wheel Aluminum Wheel