2005 Polaris Sportsman 700/800 EFI Service Manual, Page 43Get this manual
MAINTENANCE
STEERING
The steering components should be checked periodically for loose fasteners, worn tie rod ends, and damageAlso check to make sure all cotter pins are in placeIf cotter pins are removed, they must not be re-usedAlways use new cotter pinsReplace any worn or damaged steering componentsSteering should move freely through entire range of travel without bindingCheck routing of all cables, hoses, and wiring to be sure the steering mechanism is not restricted or limitedNOTE: Whenever steering components are replaced, check front end alignmentUse only genuine Polaris partsG
WARNING
Due to the critical nature of the procedures outlined in this chapter, Polaris recommends steering component repair and adjustment be performed by an authorized Polaris MSD-certified technician when replacing worn or damaged steering partsUse only genuine Polaris replacement partsOne of two methods can be used to measure toe alignmentThe string method and the chalk methodIf adjustment is required, refer to following pages for procedure