2005-2007 Polaris Ranger 500 service manual, Page 329Get this manual
ELECTRICAL ELECTRIC BOX LIFT ACTUATOR
DIAGNOSIS (if equipped)
1Disconnect the wiring harness to the box lift actuatorDisconnect Harness
2Connect multimeter across the box lift actuator harness connection
3Actuate the box lift switch in both directionsVerify that there is 12 Volts reaching the box lift actuatorFollow the diagram below for diagnosisYES NO (Not 12 Volts at actuator) Lift the hoodLocate the box lift switchCheck for 12 Volts between the REDBLACK wire terminal on the back of the switch and the BROWN wire terminalNO YES
YES(12 Volts at actuator)