2005-2007 Polaris Ranger 500 service manual, Page 303Get this manual
ELECTRICAL POWER DISTRIBUTION MODULE (EFI MODELS)
PDM Operation Solid State Circuit Breaker (SSCB #1)
Pin Signal Name Description Used to carry DC current to and from the battery and PDMDC output from the PDM is used to charge the batteryDC input to the PDM is used for power distribution
ACCESSORY 12 DCV output signal that provides POWER power to the accessory circuitFAN DIFF OUT DIFF GROUND GROUND 12 DCV output that powers the fanProvides DCV to the differential solenoidProvides ground path for the differential solenoidBattery negativeUsed to ground the PDM
ECU RELAY Powers the ECU relay output
Solid State Circuit Breaker (SSCB #2)
Pin Signal Name COIL RUN FUEL ENABLE FUEL PUMP COIL COIL AWD Description AC input from stator coil winding 112 DCV input signal to the PDM when the ignition switch is in the ON positionFuel pump control input from PDM to ECUPower output to fuel pump and hour meterAC input from stator coil winding 2AC input from stator coil winding 3Provides DCV to the hub coilVoltage is activated by the AWD switchPower is connected internally to pin J2-LProvides positive connection to the hub coilProvides negative connection to the hub coil