2005-2007 Polaris Ranger 500 service manual, Page 281Get this manual
BRAKES 3Clean caliper area before removal4Remove caliper mounting bolts and lift caliper off of discNOTE: When removing caliper, be careful not to damage brake lineSupport caliper so as not to kink or bend brake line
Pad Inspection
12Clean the caliper with brake cleaner or alcoholMeasure the thickness of the pad materialReplace pads if worn beyond the service limit
Remove Caliper Bolts Push caliper piston into caliper bore slowly with pads installedNOTE: Brake fluid will be forced through compensating port into master cylinder fluid reservoir when piston is pushed back into caliperRemove excess fluid from reservoir as required6Remove the brake pads5