2005-2007 Polaris Ranger 500 service manual, Page 275Get this manual
BRAKES FRONT BRAKE PADS
Pad RemovalDisassembly
1Elevate and support front of machine4Push caliper piston into caliper bore slowly using Cclamp or locking pliers with pads installed
CAUTION
Use care when supporting vehicle so that it does not tip or fallSevere injury may occur if machine tips or falls2Remove the front wheelLoosen pad adjuster screw 2-3 turnsPad Adjuster Screw NOTE: Brake fluid will be forced through compensating port into master cylinder fluid reservoir when piston is pushed back into caliperRemove excess fluid from reservoir as required5Push upper pad retainer pin inward and slip outer brake pad past edgeRemove the padRemove the two caliper bolts and caliper from mounting bracket