2005-2007 Polaris Ranger 500 service manual, Page 241Get this manual
FINAL DRIVE 5Assemble the shift yoke (D), shift lever (G), spring lever (F), and return spring (E)H Carrier Cover 8Install the new lightly greased O-ring (K) onto the carrier cover
F 6G 9Install the carrier cover boltsTighten and torque the bolts in criss cross pattern to 25-35 ft.lbs(34-48 Nm)25-35 ftlbs(34-48 Nm)
Use the bolt that was used to remove the shift yoke pivot shaft (H) to reinsert the shaft into the carrier coverPlace the shift yoke assembly into the carrier cover and secure with the shift yoke pivot shaft (H)Install Shift Yoke Assembly