2005-2007 Polaris Ranger 500 service manual, Page 205Get this manual
FINAL DRIVE Hub Installation
12Inspect the hubstrut bearing surface for wear or damageApply grease to spindleGrease Spindle 7Torque the spindle nut to 70 ftlbs(95 Nm)
2X4 Spindle Nut Torque:
3Install spindle through the backside of the hubstrutInstall the hub onto the spindle8
70 ftlbs(95 Nm)
Rotate wheel and check for smooth operationThere should not be any binding, rough spots or side play9Install the cotter pin and bend both ends of cotter pin around end of spindle in different directions10Install hub cap11Install brake caliper using new boltsTighten bolts to specified torque