2005-2007 Polaris Ranger 500 service manual, Page 194Get this manual
CLUTCHING 45Install nut on puller rod and hand tightenTurn barrel to apply additional tension if neededTurn sheave and barrel together counterclockwise until bushing is seated345With inside of cover toward vise, slide cover onto pullerInstall nut onto puller rod and hand tightenTurn puller barrel to increase tension as neededTurn clutch cover counterclockwise on puller rod until bushing is removed
Remove nut from puller rod and set asideRemove sheave from pullerRemove installation tool
Remove nut from puller rod and set asideRemove bushing and bushing removal tool from pullerDiscard bushing
Clutch CoverBushing Removal
1Install the Main Puller Adapter (#8) (PN 5020632) onto the Piston Pin Puller (PN 2870386)