2005-2007 Polaris Ranger 500 service manual, Page 192Get this manual
CLUTCHING Spider Removal
1Install clutch in holding fixture and loosen the spider (counterclockwise) using spider removal tool
Roller, Pin, and Thrust Washer Inspection
1Inspect all rollers, bushings and roller pins by pulling flat metal rod across the rollerTurn roller with your fingerIf you notice resistance, galling, or flat spots, replace rollers, pins and thrust washers in sets of threeAlso inspect to see if roller and bushing are separatingBushing must fit tightly in rollerUse the Roller Pin Tool (PN 2870910) to replace rollers and pinsTake care not to damage roller bushing or bearing surface of the new pin during installation
Clutch Holding Fixture: (PN 2871358) Spider Removal Tool: (PN 2870341)