2005-2007 Polaris Ranger 500 service manual, Page 118Get this manual
CARBURETION SYSTEM 1Remove float bowl and carefully remove the pressed float pinSupport Here NOTE: The starter jet is not removableUpon disassembly, place the parts in container for safe keepingPilot Screw
NOTE: Be careful not to damage the float pin tower during the float pin removalSupport the float pin tower while removing the float pinThis helps to prevent the float pin towers from breaking offRemove inlet needle seat retaining screw along with plate, and carefully remove needle seatNOTE: Do not use pliers to remove the seat or permanent damage may occur2
Starter Jet