2005-2007 Polaris Ranger 500 service manual, Page 66Get this manual
ENGINE Drain the carburetor bowl NOTE: Drain and properly dispose of the fuel Disconnect fuel line Remove bolts securing carburetor to the dampener bracket Remove carburetor Vent Line 6Remove top motor mount bracket and dampener bracketRemove any heat shields
Carb Model Shown 7Remove air box hose, rear clutch hose and the starter positive cable
Bracket Throttle Cable Insert shop towel into the carburetor flange to prevent dirt from entering the intake port Throttle Body Removal Disconnect throttle cable from the throttle body Loosen clamps on the throttle body boots Relieve fuel pressure and disconnect fuel line from fuel rail Disconnect fuel injector harness, TPS harness, MAP harness, and IAC harness Remove throttle body Fuel Line MAP IAC Lift Up to Remove 8To help access the engine components, remove engine access cover Engine Access Cover