2005-2007 Polaris Ranger 500 service manual, Page 56Get this manual
MAINTENANCE Toe Adjustment
If toe alignment is incorrect, measure the distance between vehicle center and each wheelThis will tell you which tie rod needs adjustingNOTE: Be sure steering wheel is straight ahead before determining which tie rod(s) need adjustment
Front Suspension
Compress and release front suspensionDamping should be smooth throughout the range of travel Check all front suspension components and fasteners for wear or damage Inspect front strut cartridges for leakage
CAUTION
During tie rod adjustment, it is very important that the following precautions be taken when tightening tie rod end jam nutsIf the rod end is positioned incorrectly it will not pivot, and may breakTo adjust toe alignment: Hold tie rod end to keep it from rotating Loosen jam nuts at both end of the tie rod Shorten or lengthen the tie rod until alignment is as required to achieve the proper toe setting as specified in "Wheel Toe Alignment" IMPORTANT: When tightening the tie rod end jam nuts, the rod ends must be held parallel to prevent rod end damage and premature wearDamage may not be immediately apparent if done incorrectlyHold Rod End Inspect for leaks Bolt Torque 15 ftlbs(20 Nm)