2004 Polaris Sportsman 700 EFI ATV Service Manual, Page 227Get this manual
REAR CALIPER ASSEMBLY
1Install new O-rings in the slide bolt bushing holesBe sure O-ring and seal grooves are thoroughly cleaned of all residue, or piston may bind in boreApply brake fluid to piston seals and install carefully with twisting motion to ease assembly until fully seatedSeals
3Install brake pads in caliper body with friction material facing each otherInstall the slide pins and the slide pin retaining ringTorque the slide pins to 3035 ft.lbs(4148 Nm)