2004 Polaris Sportsman 700 EFI ATV Service Manual, Page 158Get this manual
CLUTCH 13Install the compression cylinder of the holding tool on top of the spider assembly and retaining ringInstall the clutch holding tool handle and slowly compress the spider onto the shaftAlign the marks on the spider with the skip tooth on the shaft15Install the cam assembly (helix) over the shaftLine up the "X" on the cam, "X" on spider, and "X" on the stationary sheave or use the marks previously made before disassemblyNOTE: If the cam assembly (helix) is difficult to install, be sure the sheaves are alignedTo align the sheaves place the clutch assembly on flat surface with the cam assembly (helix) side downPress down on the moveable sheave belt face with both hands and the helix will releasePress Down to Loosen Helix