2004 Polaris Sportsman 700 EFI ATV Service Manual, Page 91Get this manual
ENGINE debrisThis will ensure proper sealing when installing bolts and new Loctitet20Install oil pump housing bolts (H)The new bolts contain patch lock, so Loctitet is not needed on the new boltsTorque bolts to 84 in.lbs(9.50 0.90 Nm) and follow the torque sequence on Pg3.3NOTE: Occasionally spin the oil pump when installing bolts to check for binding of the rotorsI J
H CAUTION: The crankshaft gear is extremely hot! Severe burns or injury can occur if the gear is not handled with extreme care and cautionFollow the procedure below to help ensure safety23Use extreme caution when removing the crankshaft gear from the hot plateUse pair of pliers and leather gloves when handling the crankshaft gear24Install the crankshaft gear (I) onto the crankshaftNOTE: For assembly of the gears, the cam gear and the crankshaft gear are stamped with "This Side Out This indicates the side of the gear that faces outward or away from the case