2004 Polaris Sportsman 700 EFI ATV Service Manual, Page 82Get this manual
ENGINE (R) to align the teeth of the cam gears, as shown in the pictureNOTE: Install the Cam Gear Alignment Tool (PU-45497-2) into one assembly hole counter clockwise from the timing mark
Cam Gear Spring Installation Tool Kit: (PU-45497) Tapered Pins: (PU-45497-1) Cam Gear Tooth Align Tool: (PU-45497-2)
18Line up the two gears using the timing marks and the three gear tabs that were referenced earlierPush the gears back together, using both hands and hold securelyAlign Timing Marks
PU-45497-2
NOTE: For ease of installing the Cam Gear Alignment Tool (PU-45497-2) (R), use twisting motion when pushing down on the tool21To remove the balance shaft gear, the flat side of the camshaft (P) must face the balance shaft gearTo rotate the camshaft, use the Cam Spanner Wrench (PU-45498) to rotate the camshaft so the flat side of the camshaft faces the balance shaft gearPU-45498