2004 Polaris Sportsman 700 EFI ATV Service Manual, Page 81Get this manual
Inspect TeethTabs
Replace Three Springs
PU-45497-1 To assemble: Hold the spring with one fingerStart the pointed end of the tapered pin into the cam gear hole and slowly push the dowel through the hole until the end of the dowel is almost flush with the springG Perform this procedure with all three tapered pinsG Do not push the pins too far through or the springs will pop outNOTE: Do not remove the tapered pins at this timeG 17Note in the photograph that the Tapered Pins (PU-45497- are below flush with end of the -1) springsThis helps to align the three gear tabs during the next step