2004 Polaris Sportsman 700 EFI ATV Service Manual, Page 57Get this manual
ENGINE 10Relieve the fuel pressure in the fuel rail (refer to Chapter 4, "FUEL INJECTION") for proper procedureCarefully remove the fuel rail (B) and injectorsB 14Disconnect the coolant hosesProperly dispose of any antifreeze from the engine or hoses15Refer to PVT System Chapter to remove outer clutch cover, drive belt, drive clutch, driven clutch, and inner cover (F)16When removing starter cables, note and mark ground cable and positive(+) cable mounting angle and locations Remove cables17Remove transmission linkage rod from gear selector and secure out of the way18Disconnect coolant temperature sensor wire located on the cylinder19Remove engine to chassis ground cable20Remove all engine mount nuts andor engine mount platesRemove the frame brace (F) from the front left side of the frame