2004 Polaris Sportsman 700 EFI ATV Service Manual, Page 39Get this manual
MAINTENANCE
BRAKE PAD INSPECTION
Pads should be changed when the friction material is worn to 364 (.1 cm), or about the thickness of dimeAuxiliary Foot Brake Pedal Full Full Height Engagement
Floor Board Surface Minimum Thickness
AUXILIARY BRAKE ADJUSTMENT (HYDRAULIC)
Use the following procedure to inspect the hydraulic auxiliary (foot) brake system and adjust or bleed if necessary: First, check foot brake effectiveness by applying 50 lb(approx downward force on the pedalThe top of the pedal should be at least inch, (25.4mm) above the surface of the footrest