2004 Polaris Sportsman 600/700 Service Manual, Page 278Get this manual
1Place the vehicle on level surface with the
headlight approximately 25' (7.6 m) from wall25' (7 m)
Measure the distance from the floor to the center of the headlight and make mark on the wall at
the same height3Start the engine and turn the headlight switch to high beam
1Remove three Phillips screws on the headlight
podObserve headlight aimThe most intense part of the headlight beam should be aimed 2" (5.1 em)
below the mark placed on the wall in Step 2
NOTE: Aider weight must be included on the seatOn machines with separate low beam