2004 Polaris Sportsman 600/700 Service Manual, Page 232Get this manual
I(I 4If changing flu id, remove old fluid from reservoir with aMity Vac pump or similar toolNOTE: Fluid may be forced from supply port (B) when brake lever is pumpedPlace diaphragm (C) in reservo ir to prevent spillsDo not install coverSee
Illustration on the previous pageMlty Vac (PN 2870975)
Add brake fluid to the indicatec' MAX level inside
reservoir
7Slowly pump brake lever (D) until pressure builds and holds8While maintaining lever pressure, open bleeder screwClose bleeder screw and release brake leverNOTE: Donot release lever before bleeder screw is tight or air may be drawn into caliper
Bleeder Screw Torque 25-30 In.lbs(2.80 -3.40 Nm)