2004 Polaris Sportsman 600/700 Service Manual, Page 160Get this manual
CLUTCH 89Remove nut (C) (left hand thread) from puller rod and set asideRemove installation tool and clutch sheave from pullerthe moveable sheave as the ro llers move to the other side of the rampproviding instant EBS brakingEngine braking (EBS) continues until the drive clutch speed exceeds the one-way clutch speed, or until the throllie is applied and the engine reaches clutch engagement speed, lifting the belt off of the one-way clutchCAUTIONThe driven clutch must be disassembled from the helix end to reduce spring pressureReview all information below before proceeding
LATE 2004EBS DRIVEN CLUTCH DISASSEMBLYINSPECTION Late 2004 EBS Driven Clutch Operation
The late model EBS driven clutch provides the same engine braking abilities as the earlier EBS driven
DRIVEN DISASSEMBLYASSEMBLY
1Remove driven clutch from the transmission input shaftDo not attempt disassembly of the driven clutch from the outside snap ringThe driven clutch must be disassembled from the helix side or the one-way clutch seals may be damaged